Technical Specification Details : Temperature controlled by microprocessor based PID controllerOr (Programmable temperature controller. Having 1x16 segments.) Optional :
Dual display of actual and set temperature with soft touch keys.
Thermocouple breaks protection and cold junction compensation.
Heating Elements : Silicon carbide heating elements with SCR control power unit. Insulation : Triple walled with air insulation on the outer side for minimal skin temperature made of mild steel duly powder coated. Safety : Over current and short circuit protection, High temperature alarm. High speed semiconductor safety fuses for over load protection. T.C. broken indication with automatic tripping. Inner chamber made of ceramic bricks / board. Insulation with ultra high purity alumina low thermal mass insulation. Outer Shell Shape : Rectangular made of thick gauge mild steel sheet Stirrer Arrangement : Twin Fin blade, Stirrer : Speed indication & control +/- 10 RPM, Stirrer vertical height control Speed : Variable from 50 to 500 RPM, Motor : AC/DC Motor, Speed control : 2 to 20 mA control, Indication : Digital indication & control, Lift : Manual Lift, at extreme Top & Bottom. Pre-heating furnace for reinforcement (Powders) Attached in top of the Stir Casting Furnace Heating Chamber : Stainless steel tube provided with a gate valve at the bottom to control the flow of reinforcement into the melt, Electromagnetic vibrator to push the reinforcement into the melt, Heating System : Heating Element: Nichrome Wire,Heating Chamber: high alumina tube with high temperature withstanding refractory, Insulation: High density ceramic fiber or Zirconia case wool Outer Shell : Cylindrical S.S polished tube.) Bottom Pouring Gate: Bottom Pouring Gate Valve Control for Open/Close (Manually) Gas Control : SF6 & Ar gas percent (0 to 100%), Gas Pressure Control, Gas Flow Control: 0 to 10 LPM, by rotameter optionalTemperature Sensors: PID/Programmable PID (Optional), All heaters with temperature accuracy.Digital VAF meter to indicate the power, current and voltage consumed by the machine, Power control through Solid State Relays, Necessary HRC Fuse are providedParallel action hinged type door insulated with ceramic fiber and has a viewing cap.