Dapstech Scientific Instrument'S
Meerut road industrial area, Ghaziabad, Uttar Pradesh
GST No. 09GIVPM1034H1ZV
TrustSEAL Verified
Call 0804860877462% Response Rate
SEND EMAIL
Product Details:
| Automation Grade | Automatic |
| Power Source | Electric |
| Capacity | 100 Litre |
| Frequency | 50 Hz |
| Voltage | 220 V AC |
| Inner Body Material | Stainless Steel |
| Features | Motorized Movement Of Furnace On Sliding Rail With Limit Switches |
| Phase | Single Phase |
| Outer Body Material | MS Powder Coated |
Technical Specification:
Slidable tube furnace with Dia 60mm x Length 1200 mm quartz tube and flange. Maximum temperature up to 1200°C/1400°C. One pair of sliding rail is installed on the bottom of furance. The Furnace can move by Motor from one side to the other, to achieve max. Heating and cooling rate up to 100°C/min. For the fastest heating, you can preheat furnace to the desired temperature, then move furnace to sample side. For the fastest cooling, you may move furnace to another side after heating sample. It is ideal furnace for rapid thermal processing at lowest cost.
Furnace Structure : Double layer steel structure with control panel at the bottom is mounted on sliding rail which can move from one side to another by motorised arrangement.
Power : 3.0 KW | ||
Voltage : AC Single Phase, 50/60 Hz | ||
MODEL : DSS-14P or DSS-12P | ||
Heating Element : Silicon Carbide or Kanthal A1 wire |
| |
Max. Temperature : 1400°C or 1200°C |
| |
Continuous temperature : 1300°C or 1100°C |
| |
Heating Zone Length : 200mm |
| |
Quartz Tube : ID = 60mm x length 1200mm (Working Temp. 1100°C) Two ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring | ||
Temperature controller :
PID automatic control via Thyristor with 16 segment programmable & over heated protection.
Two Type thermal couples are included. One ‘R’ type (up to 1400°C)/ ’K’ type (up to 1200°C) inbuilt in furnace to control furnace temperature, and another in K’ type (up to 1000°C ) inserted into tube to monitor sample real temperature profile
Temperature Accuracy = ±1°C
Stainless Steel Flanges :
Stainless steel flanges are installed on the both end of the tube heavy duty support.
Right flanges is fitted with KF - 25 vaccum pump connector & needle value.
Left flange has one needle and ¼” thermocouple feed-through. A 18” length x ¼” dia. K type thermal couple (included) connecting with temperature indicator will be inserted to furnace ‘s sample position to monitor heating and cooling rate during furnace sliding.
Digital vaccum gauge with resolution 1Torr and needle valve.
Vacuum Pump :
Direct Drive Vaccum Pump with Suction Capacity 100 It/min with solenoid Value, Vaccum(10-2 torr).
Double Sliding Rail :
Sliding Length : 1200mm
Motorised Movement of Furnace on Sliding Rail with Limited Switches.
Supply :
suitable to operate on 220V, single phase AC supply.