HUMIDITY CHAMBER TECHNICAL SPECIFICATION MODEL NO : DIHI - 50 1. Ambient Temperature 5-60°C2. Temperature range 5°C to +70°C3. Temperature sensitvity ±1°C4. Temperature control using PIDor equivalent control deviceProgrammble-Profile with different range up, ramp down andsoak features.-Profile containing ≥ 8 feed ponits- Cycling features for any number of times5. Independent overheatprotection systemInstalled with separate temperature sensor &buzzer alarm6. Maximum heating/ coolingrate5°C per minute7. Minimum heating/ cooling rate 2°C per hour8. Air circulation Forced type, minimum 2 tans9. Inner chamber volume Minimum 4 cubic feet with 2 shelves10. Inner chamber wall Stainless steel, appropriately insulated11. BOD outer wall MS Powder coated/ FS, Rust corrosion proof12. Supply voltage and frequency -220V and 50Hz
Chamber illumination : with 3 nos. fluorescent tubes of 60 cm length (30cm length in4 cu. ft.) placed vertically along the black wall. Separate ON/OFF switch for tubes andmin.temp. can be obtained from 10° to 50°C when all tubes are ON. With Timer 0-24hours for regulating cyclic illumination condition fixed on the top of the chamber.Humidity attachment with stainless water tank placed at the bottom & digitalhumidity(% RH) controller.Hu midity chamber with size of different length can also be made as per customer Requirement.