Industrial Furnaces

Product Details:

Additional Information:

• Production Capacity: 25

Product Details:

Item Descripation
1. Maximum Temp. :1500°C
2. Working Temp. : 1400°C
3. Temp.Accuracy : ±1°C
4. Heating Elements : Silicon carbide Spiral/Rod type, with end connection, easilyreplaceable
5. Inner Chamber : Ceramic Brick/Board with base plate of Silicon Carbide,with heatingelements placed on the side Walls
6. Insulation : Ceramic fibre of Zirconia grade
7. Construction : Triple walled with air insulation on the outer side for minimal Temperature
8. Body : Made of mild steel duly Powder coated
9. Door : Parallel action hinged type insulated with ceramic fibre and has a viewing cap
10. Power Control : SCR unit (Phase Angle Thyristor)
11. Temp. Control : Microprocessor based programmable Temperature controller. Having 1 Prog.x 16 segments. Dual display of Set & Actual Temp. with soft touch keys.
12. Sensor : Pt/Pt - Rh
13. Safety : Over current and Short Circuit Protection High Temp. alarm
14. Control Panel : 220volts,Single phase AC supply.

Product Details:

Technical Specification
 Heating Element : Silicon carbide heating element placed on two sides are easily replaceable.
Construction : The furnace has opening at the Top and Bottom lid is closed by motorized lifting. the crucible with the sample can be lifted for heating and lowered by push of a bottom (motorised).
Control Panel : Placed on the side of the furnace with all components.
Temperature Programmer : PID programmer having minimum 1 programs x 16 segments (ramp/soak)

Product Details:

Item Descripation
1. Maximum Temp. :1500°C
2. Working Temp. : 1400°C
3. Temp.Accuracy : ±1°C
4. Heating Elements : Silicon carbide Spiral/Rod type, with end connection, easilyreplaceable
5. Inner Chamber : Ceramic Brick/Board with base plate of Silicon Carbide,with heatingelements placed on the side Walls
6. Insulation : Ceramic fibre of Zirconia grade
7. Construction : Triple walled with air insulation on the outer side for minimal Temperature
8. Body : Made of mild steel duly Powder coated
9. Door : Parallel action hinged type insulated with ceramic fibre and has a viewing cap
10. Power Control : SCR unit (Phase Angle Thyristor)
11. Temp. Control : Microprocessor based programmable Temperature controller. Having 1 Prog.x 16 segments. Dual display of Set & Actual Temp. with soft touch keys.
12. Sensor : Pt/Pt - Rh
13. Safety : Over current and Short Circuit Protection High Temp. alarm
14. Control Panel : 220volts,Single phase AC supply.

Product Details:

Technical Specifications
Maximum Temp. : Zone 1 = 1150°C
Temp. Accuracy : ±1°C
Heating Elements : Kanthal - A1 wire, Coil type with end connections
Inner Chamber : Ceramic Refractory /Board
Insulation : Ceramic Fibre
Construction : Split Type (Horizontal)
Body : Made of mild steel duly Powder Coated
Max. Tube Size to be accomodated : Dia = 70mm/Hot Zone 1 = 225mm/Hot Zone 2 = 450mm/Overall length = 1000mm (approx)
Power Control : SSR unit
Temp. Control : Microprocessor based PID Digital Set Point Controller individual for each Zone. Dual Display of Set & Actual Temp. with soft touch keys. With Thermocouple break protection & Cold junction compensation.
Sensor : Cr/Al for each zone
Safety : Over current and Short Circuit Protection. Thermocouple break alarm High Temp. alarm
Power Supply : 220 Volts, single phase AC supply.

Optional
1.Quartz Tube /Alumina Tube with Couplers (Specify Dia & length)
2.Data logger to store data upto 1 Lakh records,the data can be download in pen drive and viewed on PC in excel sheet.

Product Details:

Technical Specifications
 Details:
Element are made of KANTHAL "A-1" wire coil form. Insulation by Zirconia cera wool, which avoids loss of energy, this arrangement also assures the most uniform distribution of heat. A viewing cap is also provided on the door. Temperature controlled by "Microprocessor" PID Digital Indicator cum Controller" fitted in the front of the furnace. Dual display of process set temp.

Additional Information:

• Delivery Time: 30-45 Days

Product Details:

Technical Specifications
 Maximum Temp. : 1650°C / 1700°C
 Working Temp. : 1600°C
 Temp. Accuracy : ±2°C
 Heating Elements : Molybdenum discilicide (MoSi₂) heating     elements, easily replaceable.
 Inner Chamber : Ceramic Brick /Board with heating elements placed on the side walls.
Insulation : Ultra high purity alumina low Thermal mass insulation.
Construction : Tripple walled with air insulation on the other side for minimal Skin Temp.
Body : Made of Mild steel duly Powder Coated.
Door : Parallel action hinged type insulated with ceramic fibre and has a viewing cap.
Power Control : SCR unit (Phase Angle Thyristor)
Temp. Control : Microprocessor based Programmable Temperature Controller. Having 1Prog. x 8 segments.Dual display of Set & Actual Temp. with soft Touch keys. 
With Thermocouple break protection & cold junction compensation.
Sensor : Pt /Pt - Rh
Safety : High Speed Semi conductor Safety Fuse for over load protection.
T.C. Broken Indication with automatic tripping.
Soft start and stop facility suitable for heating elements.
Over current and Short Circuit Protection High Temp alarm.
Control Panel : Separate Control Panel with all electrical Acessories.
Power Supply : 415 Volts, 2/3 phase AC supply.

Product Details:

Technical Specification
Maximum temp. 1150°C
Minimum Temp. 1000°C
Heating Elements : kanthal- A1
Tube : Alumina
Rocking Angle : 30°C

Product Details:

Technical Specification
 Details :
Temperature controlled by microprocessor based PID controllerOr (Programmable temperature controller. Having 1x16 segments.)
Optional :

• Dual display of actual and set temperature with soft touch keys.
• Thermocouple breaks protection and cold junction compensation.

Heating Elements : Silicon carbide  heating elements with SCR control power unit.
Insulation : Triple walled with air insulation on the outer side for minimal skin temperature made of mild steel duly powder coated.
Safety : Over current and short circuit protection, High temperature alarm. High speed semiconductor safety fuses for over load protection. T.C. broken indication with automatic tripping.
Inner chamber made of ceramic bricks / board. Insulation with ultra high purity alumina low thermal mass insulation.
Outer Shell Shape : Rectangular  made of thick gauge mild steel sheet
Stirrer Arrangement : Twin Fin blade, 
Stirrer :  Speed indication & control +/- 10 RPM, Stirrer vertical height control
Speed : Variable from 50 to 500 RPM,
Motor : AC/DC Motor,
Speed control : 2 to 20 mA control,
Indication : Digital indication & control,
Lift : Manual Lift, at extreme Top & Bottom.
Pre-heating furnace for reinforcement
(Powders) Attached in top of the Stir Casting Furnace
Heating Chamber : Stainless steel tube provided with a gate valve at the bottom to control the flow of reinforcement into the melt, Electromagnetic vibrator to push the reinforcement into the melt,
Heating System : Heating Element: Nichrome Wire,Heating Chamber: high alumina tube with high temperature withstanding refractory, Insulation: High density ceramic fiber or Zirconia case wool
Outer Shell : Cylindrical S.S polished tube.)
Bottom Pouring Gate: Bottom Pouring Gate Valve Control for Open/Close (Manually)
Gas Control : SF6 & Ar gas  percent (0 to 100%), Gas Pressure Control, Gas Flow Control: 0 to 10 LPM, by rotameter optionalTemperature Sensors: PID/Programmable PID (Optional), All heaters with temperature accuracy.Digital VAF meter to indicate the power, current and voltage consumed by the machine, Power control through Solid State Relays, Necessary HRC Fuse are providedParallel action hinged type door insulated with ceramic fiber and has a viewing cap.

Additional Information:

• Delivery Time: 2-3 Month

Product Details:

Technical Specification
 Heating Element : Silicon carbide heating element placed on two sides are easily replaceable.
Construction : The furnace has opening at the Top and Bottom lid is closed by motorized lifting. the crucible with the sample can be lifted for heating and lowered by push of a bottom (motorised).
Control Panel : Placed on the side of the furnace with all components.
Temperature Programmer : PID programmer having minimum 1 programs x 16 segments (ramp/soak)

Additional Information:

• Delivery Time: 45 Days

Product Details:

 Technical Specifications

Maximum Temp. :1500°C
Working Temp. : 1400°C
Temp. Accuracy : ±1°C
Heating Elements : Sillicon Carbide / Rod type, with end connection, easily replaceable.
Inner Chamber : Ceramic Board with base plate of Silicon Carbide, with heating elements placed on the top.
Insulation : Ceramic fibre of Zirconia grade
Construction : Tripple walled with air insulation on the outer side for Minimal Skin Temp.
Body : Made of mild steel duly Powder Coated.
Door : Parellel Action hinged type insulated with ceramic fibre and has a viewing cap.
Power control : SCR unit (Phase Angle Thyristor)
Temp. Control :  Microprocessor based programmable controller having 1 program x 16 segments (ramp/soak profile)
  Dual Display of Set & Actual Temp. With soft touch keys.With thermocouple break protection & cold junction compensation
Sensor : Pt /Pt – Rh 13%
Control Panel : 220volts, single phase AC supply

Optional
Data logger to store data upto 1 Lakh Records, the data can be download in pen drive and viewed on

PC in excel sheet.

Product Details:

Price depends on the client's requirement. Different capacity specifications are available.

Product Details:

Technical Specifications
 Details:
Element are made of KANTHAL "A-1" wire coil form. Insulation by Zirconia cera wool, which avoids loss of energy, this arrangement also assures the most uniform distribution of heat. A viewing cap is also provided on the door. Temperature controlled by "Microprocessor" PID Digital Indicator cum Controller" fitted in the front of the furnace. Dual display of process set temp.

Product Details:

Maximum Temperature : 1100°CCrucible : Silicon Carbide PotCapacity : 10Kg. (Aluminium)Thermocouple : K TypeTemp. Controller : PID DigitalTemperature ControllerPower Relay : ContactorControl Panel : Separate Tilting ManualFabrication : Heavy Angle Iron FramePower Supply : 415V, 3Phase AC.