Laboratory Equipments

Product Details:

Technical Specification
Temperature Control : PID Microprocessor Control with Dual Display of Set & Actual Temp.
Construction : Double Walled, Inside made of stainless Steel 304 & outer made of Mild Steel Duly Powder Coated
Door : Hinged insulated door fitted with heat resistant gasket.
Heating element : Sheathed Tubular
Insulation : High Quality Mineral Wool
Air Circulation : Motorised Blower, for Uniformity of Temp.
Trays : S.S Wire Mesh Nickle Plated (2/3 No.)
Timer (Optional) : 99Hr.
Power Supply : 220V, 50Hz Single Phase Ac

Product Details:

Technical Specifications:
1. Ambient condition : 5-60°C
2.Operating/producible/achievabletemperature range in BOD incubator :5°C to +70°C
3. Temperature sensitivity : ±0.1°C
4. Temperature uniformity : ±0.1°C
5. Temperature control using PID or equivalent control device :Programmable-Profile with different ramp up, rampdown and soak features-Profile containing>= 8 feed points-Cycling feature for any number of times
6. Data acquisition port and cable for PC/laptop communication data loggerYes .to feed temperature cycles and record time vs. temperature datafrom BOD sensors.
7. Independent overheat protection system: Installed with separate temperature sensor & buzzer alarm.
8. Maximum heating/cooling rate : 5°C per minute
9. Minimum heating/cooling rate : 2°C per hour
10. Air circulation : Forced type,minimum 2 fans
11. Withstand continuous operation :Yes, more than six months
12. Inner chamber volume : Minimum 2 cubic feet with 4 shelves16
13. Inner chamber wall : Stainless steel, appropriately insulated
14. BOD outer wall : MS Powder coated/FS,Rust,corrosionproof
15. Lock and buzzer alarm for door : Yes
16. Calibration and operating manual : Yes
17. Supply voltage and frequency : ~220V and 50Hz
18 CFC free refrigeration system : Yes
19. Performed and complied with the attached two tests : Yes

Product Details:

Technical Specifications:
 Rotation Speed : 900
Timer : 99:59(100 Hours)
Temperature : Digital (Ambient to 80°C)
Display : 48x48 
Numeric LCD Keypad : Soft Touch
Stirrer System : Six
Drive System : DC motor
Power Supply : 220V + 10% 50Hz

Product Details:

Vacuum Oven (Microprocessor Controlled)

Make-Dapstech 

Model-DIV

Size – 250 x 300

Technical Specification

Microprocessor Based vacuum ovens are accurate and reliable.

Proportional Integral Derivative (PID) temperature control system continuously monitors rate of temp. change, eliminating temperature Overshoot and undershoot.

Heaters are embedded on the periphery of the chamber, Providing excellent temperature uniformity and quick heating times.

The gap between the inner and outer wall is filled with special grade glass wool insulation.

Outer body is made of mild steel finished in attractive powder coating and inner chamber of stainless steel, with 2No’s. wire mesh trays.

Moulded,joint less door gasket and knob ensure a tight seal.

Fitted with bourden type dial gauge of range 0-30”Hg.

Gas valve allows evacuation & venting.

The front door has heat resistant glass window, for allowing viewing of samples.

 

Optional

DIGITAL VACUUM GAUGE

The units of vacuum can be set as desired i.e. Torr, mm Hg, Bar, Mile Bar resolution = ± 1 Torr /mmHg / Millibar

 

VACUUM PUMP

Double stage rotary Oil filled Vacuum Pump Capacity : 75 : Ltr / min, Motor : 0.5 HP., with Solenoid valve to prevent back flow of oil.

OR

Direct Drive Vacuum Pump

Product Details:

Technical Specification

Stirrer Drive: 1

Number of Cells: 6 stage

Cellsize : 5ml /10ml/15ml(optional)

MaterialofConstructionofEnclosure: Mild Steel outer Body Powder Coated 

RPMIndicator: Digital

SpeedRange&Accuracy : 50-500rpm(±1.0%)   

Controlled by Regulator           

WaterCirculationSystem

Water circulating in each cell.

MaterialofConstructionofEnclosure: S.S. 304 inner chamber.

TemperatureRange&Accuracy: Ambient to 80°C(±0.2°C)

Digital Temperature controller for precise temperature control.

PowerRequirements: 220/230V AC 50 Hz

                                         110/220v AC 50-60 Hz*

Accessories

Magnetic Stirrer

Timer

 

Optional :

 

Touch Panel HMI

10x10 Program segments with data logger

Ø  4.3”(480*272) 65,536 Colors TFT

Ø  Cortex-A8 800MHz CPU

Ø  256 MB RAM

Ø  256 MB ROM

Ø  1 COM port / 1 extension COM port

Ø  USB Host

Ø  USB Client

Ø  Operation Temperature: 0??? ~ 50

Ø  Storage Temperature: -20??? ~ 60

Pressing times: >1,000K times

Product Details:

 Technical  Specifications
   Capacity available : 12 Trays, 24 Trays, 48 Trays, 96 Trays, 192 Trays.
Material of construction : Mild Steel, Stainless Steel 304 / 316 or any.
Temperature Range :Ambient to 150°C / 250°C / 400°C / 500°C.
Air circulation : Vertical, Horizontal or Combination.High Volume and high Velocity Airflow provides twice the air changes compare to ordinary Industrial Ovens.
Timer : Digital Pre-Settable with range up to 0 to 999 Minutes / Seconds.
Paint : Enamel Paint / Epoxy Coating / Powder Coated.
Power supply : 230 Volts Single Phase 50Hz / 60Hz 415 Volts 3 Phase 50Hz / 60Hz.
Heating Elements : Low wattage Incoloy sheathed heating elements / SS Tubular
Insulation : Ceramic Wool / Mineral Wool
Door Gasket : Fibre Glass Rope (High Temp) / Silicon Gasket.
Heavy Duty Shelves / Trays : Made out of angles with wire knitted mesh or perforated sheet suitable for oven internal size will be provided along with the oven.
Exhaust Manual or Automatic : Automatic forced exhaust system with fresh air inlet. Manually adjustable damper with fresh air inlet.
Heating Media : Electric / Gas / Diesel / Steam / Thermic OIL etc.        

Product Details:

Technical Specifications
 1. Class II Bio-safety cabinet, type A2, open-front, ventilated cabinet in ergonomic designvertical type
2. ULPA/HEPA-filtered, re-circulated mass airflow within the work space
3. Exhaust air from the cabinet is also filtered by ULPA/HEPA filters
4. Size: approx. 4 ft
5. Air inflow velocity: Approx. 0.45 m/s
6. Air down flow velocity: Approx. 0.30 m/s 7. ULPA/HEPA Filter with minimum 99% efficiency against 0.3µm particles, minimum 99% filter efficiency at MPPS
8. Low noise (< 65 db), Low energy consumption and heat output
9. Microprocessor controlled functions with LCD display
10. Audible and visual alarms
11. Florescent Light intensity approx. 1200 lux
12. Standard UV light along with additional UV-interlock
13. Cabinet made of steels (work zone - stainless steel and side walls-electro galvanized steel) with antimicrobial coating 14. Electric supply requirement : 220-240V, AC, 50Hz
 15. Compatible stabilizer
16. Should have support stand with caster wheels for 4 ft cabinet

Product Details:

Technical Specification

• Automatic rotor identification, ensures operator safety
• Stainless Steel centrifuge Chamber, easy to clean
• Brushless Induction motor with variable frequency drive
• Microprocessor controller with digital display
• Stable speed output even under unstable voltage conditions
• Smooth & soft start
• Low sample temperature rise
• Inverter fault detection with auto shutdown
• 7 segment LED display of speed 
• Alphanumeric LCD display of speed & RCF 
• Selection of 3 acceleration & deceleration profiles 
• Digital countdown timer & continuous run
• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Dynamic brake for quick deceleration
• Motor overload protection
• Gas hinge to prevent door falling
• Emergency lid lock release
• Last set parameters recall (Useful for repetitive analysis)
• Wide variety of rotors & reduction adaptors

 

Product Details:

Technical Specifications
Water bath incubator shaker is of sturdy construction with outer body made of mild steel sheet duly powder coated and inner chamber made of stainless steel grade 304.
The gap between the inner and oSuter chamber is filled with effective insulation.
Temp. is controlled by Microprocessor PID Temp. controller,with dual display of temp. (process & set value).
A variable speed motor is fitted to provide shaking of the tray, the speed of the motor can be varied through a stepless electronic regulator fitted in the panel.
The  shaking tray moves on four wheels / balls (Reciprocating), Eccentric Cam (Orbital).
With digital RPM indicator (Optional)
In refrigerated Model, Temp. below ambient is achieve by hermetically sealed CFC FREE compressor (ISI Mark) placed below the water bath with other refrigeration accessories.
For above ambient temp. stainless steel immersion type heating elements are provided inside the bath.
The bath is provide with a stainless steel pyramidical shaped lid and a drainplug. Supplied complete with one shaking rack of 100 ml conical flasks.

Product Details:

Technical Specifications
 Frequency : 50 Hz
Voltage : 230V AC
Material : M.S. Powder coated
Capacity : 50 OR 100ml X 2 Nos
Type : Digital
Usage/Application : Check Bulk Density of Powder
Supported by trained personnel, we are readily instrumental in presenting a comprehensive spectrum of Digital Bulk Density Apparatus.
Features:

• Précised designs
• High quality
• Long lasting
• Sturdy

The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features:
Specifications:
Cylinder Capacity: 50 m1. x 2 nos.No. of Drops: Adjustable between 1 to 9999 dropsDisplay: Digital 12 mm Red LEDDrop Height : 25 mm approximately
Dimension: 350 mm W x 270 mm D x 280 mm H
Weight: 11 kg approximately

Product Details:

Technical Specification
 Usage/Application : For Research Purpose
Magnification : 20x
Is It Portable : Portable 
Light Source : LED
Eyepiece : 10x
Warranty : 1 Year
Vertical Stereo Microscope with extension pillar base with fixed objective 2x and 10x WF eye piece pair with  trans illuminision base with hand rest

Additional Information:

• Delivery Time: 15 Days

Product Details:

We are Engaged in offering wide range of quality products to our clients , our products are really appreciated by our clients.

Additional Information:

• Production Capacity: 50

Product Details:

Length (30cm length in 4cu. Ft.) placed vertically along the black wall, Separate ON/OFF switch for tubes and min. temp. can be obtained from 10° to 50°C when all the tubes are ON. With Timer 0-24 hours for regulating cyclic illumination condition fixed on the top of the chamber.

Product Details:

We are Engaged in offering wide range of quality products to our clients , our products are really appreciated by our clients.

Product Details:

All Glass (Borosilicate ) double Distillation Apparatus consists of two flask of 3 or 5 liters with heating element embedded in glass fused in spiral type coil internally at the bottom and trappped Ground Glass Joint at the top. Suitable to work on 220Volts, 50 cycles AC.With Metallic Stand for Double distillation Apparatus complete with ring to hold the flasks, clamp to hold the double walled condenser, electric Board with switch, neon light indicator and connecting cord of flask and mains.

Product Details:

A 100 mm dia lens covers the entire illumination field maginifications assure highly accurate results. Counting plate with standard Wolfhugel ruling ensures clearly differentiated and sharply defined colonies. This model is fitted with automatic 4 digital Display. Each touch of marking Pencil on the petridish increments the colony count by ‘1‘’ and the glowing L.E.D Maximum colony count possible up to 9999. Suitable to work on 220V, single phase, 50Hz, AC suplly.

Product Details:

Technical Specifications:
Inner chamber and jacket are made of high grade stainless steel 304 sheet. The outer body is made of thick stainless steel sheet.
The lid is made of thick stainless Steel plate WITH SAFETY LOCKING DEVICE.
The boiler placed below the chamber is made  of stainless steel with view glass and immersion heaters, with low water level cut off.
A multiport value made of SS is installed for controlling the sterilization cycle.
 The pressure is adjustable from 5 to 20 psi ± 1 psi controlled by automatic pressure control switch.
Fitted with the vaccum breaker, steam trap, dial type temp. gauge .

The whole unit is mounted on a robust tubular stand made of MS duly painted.
Suitable to operate on 440V, 3 phase AC supply.

Product Details:

Cleaveland flash point & fire point apparatus

(Compliance with international standards IP 36 and ASTM D-92)

Additional Information:

• Production Capacity: 50

Product Details:

Technical Specifications:
Temperature range : 50°C. To 250°C. ±1°Cvolts : 220/230v
Supply Type :Manufacturer, Exporters, Suppliers
The bath is double walled inside made of S. Steel 304 grade and outside of made of mild steel sheet duly powder coated. The gap between the two walls is filled with high grade glass wool to minimize thermal loss. Temperature range from 50°C. To 250°C. ±1°C. is controlled by Digital Temperature indicator cum controller Microprocessor Based PID Controller. Supplied complete with lid and cord & plug To work on 220-230 volts AC Supply.

Product Details:

Technical Specification
 Round and rectangular shape : Up to 250°C temperature of more
Chemical resistance and durable construction : Supplied with and without stirrer
Excellent temperature uniformity : Stainless steel heating top
Analog and digital controls : Safety thermostat
Temperature : 250°C
Heating Plate : Cast Iron
Controller : Energy Regulator
Power Supply : 220 / 230 Volts, 50 Hz
Optional
-Overhead stirrer-PID Controller-Stainless steel heating plate-Digital temperature display-Support stand.

Product Details:

A surface roughness tester, also known as a profilometer or surface finish gauge, is a device used to measure the roughness of a surface. Surface roughness refers to the finely spaced micro-irregularities on a surface, and it is an important parameter in various industries such as manufacturing, engineering, and quality control.